Massachusetts Rhode Island STM Report for July 2023

Section Traffic Manager Marcia Forde,  KW1U writes:

Greetings All. You will note I have included Rhode Island beginning with the July report since I have been appointed Interim Section Traffic Manager for Rhode Island, appointed by Nancy Austin KC1NEK, SM.

We look forward to increasing NTS activity in Rhode Island. Hams in RI have long been included in our section traffic nets and we hope to see even more activity.

Want to hear about what is going on with the NTS 2.0 project? There is now a web site at nts2.arrl.org where you can learn more about what the teams have been working on.

Please find Marcia’s full July report at https://ema.arrl.org/massachusetts-rhode-island-stm-report-for-july-2023/.

Note there information on “Event Happenings”, “Net News”, “NTS 2.0 Update” and “Traffic Handler of the Month”, along with a peek preview of an upcoming initiative.

73, Marcia KW1U
STM EMA/WMA/RI

Introduction to the Massachusetts Rhode Island Digital NTS Net (MARIDN)

The Massachusetts Rhode Island Digital NTS Net (MARIDN) is a Section-Level net of the National Traffic System (NTS) of the ARRL. MARIDN meets weekly for the purpose of passing NTS messages within, into, and out of the sections of Eastern and Western MA and RI. MARIDN is supplemental to the Massachusetts Rhode Island Phone Net (MARIPN) and Massachusetts Rhode Island CW Net (MARICW). MARIDN uses digital modes rather than voice or CW, particularly the fldigi suite of software.

How to Participate in MARIDN

Participants in MARIDN use the fldigi software suite, particularly fldigi and flmsg. This introduction assumes the user has downloaded, installed and configured fldigi to run in their environment, and has a basic understanding of how to use the software, including the ability to receive and send using  fldigi, and send a message using flmsg. There are countless YouTube videos and other helpful documents to assist a new user with downloading and configuring fldigi; how to install and configure one’s fldigi setup is beyond the scope of this introduction.

MARIDN meets at 1800 local time every Tuesday. MARIDN may run additional sessions as needed, e.g., during declared emergencies and for ARES exercises.

To get started, set your system as follows:

Transceiver:

3583 kHz, USB (or USB-Data); Squelch off; AGC fast; Noise Reduction off; Noise Blanker off; Audio (Speech) Processing off;

fldigi: Mode: THOR22; center-point 1500 Hz; AFC off; RsID on for receive and transmit;

flmsg: application running; open the “Received Messages” window (Utilities -> Received Messages) and position the window to be easily visible

The Net Control Station (NCS) will call the net, including instructions for checking in. All stations are encouraged to check in, whether or not they have traffic.

When a station sends a message, fldigi will decode the message and pass it to flmsg for display. Each received message will create a new row in the Received Messages window. Select (click on) a row, then click the View button to see that message in flmsg and also in a browser window.

Other Thoughts

MARIDN participants run a Zoom call simultaneous with the net, to help with coordination. We encourage stations to connect to the Zoom, especially the first few times they check in to the net. For more information about MARIDN, including the Zoom link, please contact Net Manager Jon N1ILZ at [email protected].

Conclusion

MARIDN is an officially sanctioned net within the National Traffic System (NTS). Operators use the fldigi software suite to pass messages. In addition to traditional Radiograms, flmsg can natively send a wide variety of other forms, including ICS-213. We believe this can and will be an important part of NTS going forward. We encourage stations from all over Massachusetts and Rhode Island to join the fun!

Update on NTS 2.0 Modernization Project

NTS logoMarcia Forde, KW1U, writes:

The following update on the NTS 2.0 modernization project was recently sent to all ARRL Section Managers and Section Traffic Managers for dissemination to traffic handlers in their areas. More information can be found on the new website nts2.arrl.org under the Standards and Procedures tab. Information on handling instructions and numbered radiograms is available now and information on the encapsulation radiograms for emergency communications will be there soon. There is also a tab To Contribute Your Ideas if you wish to contribute those.

Greetings to all STMs and SMs,

It was brought to my attention that little to nothing has been disseminated regarding progress on the part of the NTS 2.0 teams. My apologies for not keeping folks better up to date.

You are aware that we held briefings throughout the various ARRL divisions during the latter part of 2022, and enlisted the help of 35 to 40 volunteers. Each was assigned to one or more of five implementation teams who have met weekly since the beginning of 2023. We have been able to secure a page on the ARRL website to inform you of the ongoing projects, but it is only recently that we are now able to share some results of these teams’ work.

1. An article on NTS has been published in the July issue of QST which you may have received already. We are grateful to the editors of QST for highlighting this program and look forward to more articles in the future.

2. Perhaps highest on the minds of most folks is an update to the Net Directory. This is a major undertaking as the current directory has not been updated in recent times and the software has not been felt by many to be very user friendly. While we don’t have a finished product to show you at this time, it is important for folks to know that one of our NTS 2.0 implementation teams has drawn up a set of requirements we think various groups will want to see implemented and this has been forwarded to the IT department at ARRL. Emergency manager Josh Johnston KE5MHV and the IT department have been pleased with our work and are now working with us to develop a product we hope you will find informative and easy to use. It will take a little time yet before you will see a finished product as the entire website at ARRL is in the process of being updated. We want you to know however that definite progress is being made, so we ask for your patience and hope you will be happy with the new net directory once it has been completed.

3. In accord with renewed interest in emergency communications preparedness on the part of amateur radio and the ARRL in particular, several of our teams have been working on encapsulation of the forms used by emergency service organizations. Forms such as the ICS-213, ARC-213, HICS-213 and the Texas STAR Form originated by emergency personnel must be deliverable exactly as sent, and to accomplish this these forms must be encapsulated within a radiogram for transmission via the National Traffic System. A great deal of thought and testing have gone into this product which will be revealed on the ARRL’s website (nts2.arrl.org). Documentation and training will be provided. While we recognize such emergency traffic will likely be sent via digital means where available, we feel it is important that voice and CW circuits must be capable and practiced in the event they are needed.

4. Because of the above mentioned use of emergency type traffic, there are some additional requirements which are important. You will find these on the above noted website as additional handling instructions and ARRL numbered radiograms.

Two new handling instructions are being added. One is HXI which indicates an encapsulated message is included which must be relayed so as to be deliverable in a particular format. The second is HXR, which requires the delivering station to notify the originator of the message confirming that the recipient has personally received the message. This is a frequent requirement from served agencies. This is different from the HXC instruction, which is sent by the delivering station instead to the station of origin, whose call sign is in the header. Where HXC notifies the station of origin of delivery (such as the message being deposited in a mailbox) of their Radiogram, HXR confirms to the sender that the recipient has the message in-hand.

A new ARRL numbered radiogram has been added as “ARL FORTY ONE”. This is to be used with an HXD handling instruction where tracing a message is important to find any possible breaks in the relay chain. You will find a number of blanks to be filled in a service reply. This standardization of the HXD reply will allow for more efficient tracking and better understanding of the process.

While we understand change can be hard, we hope you will find value in the above. The teams continue to work diligently to make improvements and we welcome feedback from the NTS community. Please share with net participants in your sections.

73, Marcia KW1U
NTS 2.0 Implementation Teams